ELECTRICAL AND MECHANICAL  Associate ENGINEER
Having 9 years of GCC progressive work experience in the field of mechanical designs and electrical. energetic engineer with a sound technical back ground in the field of mechanical interface or cabinet design or fixation  of cabinet support desing UHF,VHF antenna support design Royal Saudi Navy and Saudi Armed Forces all radio communication systems cabinet support designing field of electrical installation, testing & commissioning, maintenance analyzing and troubleshooting for controlling panel electrical, instrumentation and control system. Cabling for all commissioning RJ45 cable ,coaxial cable, radio cable 4P,10P,28P,36,cabling routing Preparation and termination Hands on experience of electrical, instrumentation and controls cabinet Assembly testing and inspection. Working for multiple projects in GCC comprises on (ICS ESD, FAS, RTU, PCS, DCS, CCR and SCADA)

WORK EXPERIENCE

Site Supervisor Mechanical and Electrical Team

Royal Saudi Navy and Armed Forces (JEDDAH )

01/2016 – 12/2018 Saudi Arabia THALES (Defense & Security)

Performing Mechanical operation design review- Supervisory/Inspector. Proficient in the utilization of standard engineering theories and practices. Involve CAE (computer aided engineering)/CAD (computer aided design) applications. correct implementation of the project quality plan and quality procedures and productivity related to all Mechanical works. Prepares issues specifications, data sheets, and other mechanical documents as necessary. inspections to determine if Mechanical works have been done in accordance with contract specifications. Modernization of the ships, including the fitting of new Combat Management systems, anti-ship and SAM systems, and sensors & electronics. Working with THALES coordinate with NAVEL GROUP, MBDA and ODAS for the upgrade of the six ships under the LEX (Life Extension) Sawari 1 tankers and Frigates of Boraida class and Sawari 2 programs for the three Al Riyadh Frigates. Royal Saudi Navy and Saudi Armed Forces all radio communication systems cabinet support designing Achievements/Tasks

Providing technical support by identifying technical problems and determining corrective actions in own area of expertise via remote or on-site service in any Service category (installation and radio commissioning; maintenance; repairs; engineering and consulting; advanced services;
extensions, upgrades and retrofits; end of life services, replacements, etc.). Investigating customer needs through professional consulting. Providing technical consulting and specialist assistance on Service solutions to management and customers by giving relevant inputs on customer requirements and proposed service products/solutions. Determining effective Service applications, equipment and methods to develop, market or manufacture new Service offerings to respond to customer requirements cost effectively. Managing customer relationships and maintaining regular contacts with key customers. Identifying new sales opportunities, proactively communicating both with the customer and sales teams to ensure customer needs are met and business opportunities utilized for Service growth. Conducting specialist support and advisory service for Sales team. Ensures accurate communication and exchange of technical information to the customers to address their needs and reports and follows up customer feedback to achieve high level of customer satisfaction. Coordinating and performing specialist Service projects in relevant areas internally and externally (e.g. milestones, project plan, cost supervision, action steps, project reviews, and project supervision) including all commercials. Preparing all required technical documents and reports for project contracts to be signed by the customer representative. Reports work done in a timely manner and provides relevant technical supporting documents to the service execution teams and follows up when needed. Participating in maintenance meetings and improvement activities to proactively provide suggestions for product and quality improvement . Providing technical specialist support and coordinating for the Service team. Planning activities, coordinates the work of internal and external technicians and assigns them specific tasks related to Service needs. Supervising project teams and contractors at work site and monitors performance. Applying safety rules and safe practices as well as environmental responsibilities. Reporting unsafe practices and incidents.
    Contact: Benjemaa Chaouki – Project Manager (THALES Defense & Security)

WORK EXPERIENCE
Electrical and mechanical hardware Supervisor
Dammam /SIEMENS
01/2014 – 02/2016 Dammam/Saudi Arabia SIEMENS Oil &Gas Division
SIEMENS (Oil &Gas) Working as Electrical and hardware Engineer, responsible for hardware design , pre commissioning & commissioning activities at various Bulk Plants of Saudi Aramco in Eastern, Western & Central region of Saudi Arabia Engineer, Terminal Management System – Waste Water, Saudi Aramco Complete cut over of plants from Redundant SIMATIC S5 PLC to RedundantS7-400H (Fault Tolerant) PLC Systems. Instrumentation and modification in live cells of the plants for the field instruments and for establishing communication paths between the modules and the LAN cabinets. Supervision of laying of the fiber optic cables with in the cell and for establishing communication between the Master PLC Stations and the Remote I/O Cabinets. Supervision of cable laying f r o m the PLC cabinet r o u t e d through Marshaling Cabinet, Junction Boxes to the field instrument; Instrument and Distribution Panel Boards. Installation of patch panels for fiber optic cables, configuring and commissioning of optical link modules. Establishing links through serial servers, RS-232/485 communicates -ion protocols and Profibus communication. Modbus communication between Siemens’ PLCs and third party devices. Evaluate Piping and I n s t r u m e n t Diagrams (P&IDs) and g e n e r a t e Input/output l i s t s , from vendor to design and implement upgrades in Bulk Plants, involving Level Transmitters, Temperature Transmitters, Level Alarms, Limit Switches and Motor Conditions Feedback. PLC Cabinet Design & I/O Loop checking. Supervision of motor pre commissioning and commissioning. Supervision of Calibration of instruments and verification through HMI. Establishing communication between the MBR PLC Stations to the Master PLC Stations through serial connection via Remote I/O Cabinets.Temperature. Indication Transmitters, Motor Operated Valves, Air Operated Valves, Resistor Thermometers, Level Indication Transmitters, Pressure Gauges, Temperature Gauges. Trouble shooting and correction at all levels of pre commissioning and commissioning. Factory Acceptance Testing and Site Acceptance Testing. Site Acceptance Testing (SAT). I/O Loop testing from operator interface of the field-instruments including Flow Control Valves, Flow Indication Transmitters, Pressure Control Valves, Pressure Indication Transmitters, evements/Tasks
01-Projects Hasbah and Arabiya project (110 6bay control cabinets). Work on Hasbah and Arabiya project onshore and offshore platform 02- Ghawar project (638 RTU cabinets testing & commissioning). 03-RTBP, QSBP, NRBP (30 control cabinets). 04- Manifa project (18 control cabinets). 05-Fabrication and testing of control panels based on the wiring schematics approved by Saudi Aramco as per their standards.
Testing (Pre-FAT/FAT) Continuity of electrical and signals (AI, A0, DI, DO) loop checks by means of short circuiting and current injection. Powering up of cabinets by means of power supply and selectivity check. CPU Diagnostic check Module replacement test Power supply distribution (120 VAC; 24 VDC) accordingly to drawing, CB Circuit Breakers, Fuses in term of Selectivity, inside and outside the Cabinet Power supply alarms locally and remotely send to system. Troubleshooting of all hardware related issues arise during cabinet assembly and hardware testing.
Pre commissioning and Commissioning Adequate knowledge of work permit system for site pre-commissioning and commissioning activities. Installation of cabinets and accessories as per lay out drawings and standards. Preparation and Termination of field cables. Verification of installation of cabinets and termination of cables as per drawings. Powering up of cabinets as per power up procedures. Hardware loop checks from field equipment to marshaling and control cabinets. Installation of Communication and networking equipment and required wiring (F.O cables, Ethernet cable, F.O patch chords).
Supervise and manage team of technicians to complete the assigned job on time with all EHS and Quality requirements. Adequate expertise of understanding of layout, communication, electrical, grounding, interconnection and I/O drawings. Understand the philosophy of electrical and instrumentation controls system designs (AC/DC). Sound understanding of Saudi ARAMCO standards for cabinet assembly and testing (SAMSS 820 and SAMSS 821). Cable and wire sizing requirements Circuit separation Grounding requirements Termination requirements Protection of hazardous circuit (above 48 AC/DC) Inspection requirements (visual, electrical, dimensional, cold and hot loop checks) Accessibility requirements for easy maintenance and usability. Performed hazard and risk assessment of all the task related to work before starting as per EHS requirements (PPE). Hands on experience of performing Pre-FAT and FAT activities. Adequate experience and expertise of site pre-commissioning and commissioning activities Knowledge of current legislation and work practices for mechanical work and workshops. Understanding of Risk assessments and Coshh
    Contact: Junaid Qazi – Senior Facilities Manager (FM)

WORK EXPERIENCE
Senior Supervisor ICS
YOKOGAWA (Oil &Gas)
01/2011 – 07/2013    Dammam/ Saudi Arabia

Cabinet Assembly Hands on expertise of cabinet mounting plate fabrication as per layout drawings. Installation of mounting plate accessories Installation of system components (PLC CPU racks, I/O modules, MTAs, terminal blocks, circuit breakers, grounding bus bars, tagging, labeling and etc.) Preparation and termination of wires in component, TBs, Field TBs and etc. Routing of wires in wire duct ducts as per drawings and cabinet segregation.

Testing (Pre-FAT/FAT) Continuity of electrical and signals (AI, A0, DI, DO) loop checks by means of short circuiting and current injection. Powering up of cabinets by means of power supply and selectivity check. CPU Diagnostic check Module replacement test Power supply distribution (120 VAC; 24 VDC) accordingly to drawing, CB Circuit Breakers, Fuses in term of Selectivity, inside and outside the Cabinet Power supply alarms locally and remotely send to system. Troubleshooting of all hardware related issues arise during cabinet assembly and hardware testing.

Pre commissioning and Commissioning Adequate knowledge of work permit system for site pre-commissioning and commissioning activities. Installation of cabinets and accessories as per lay out drawings and standards. Preparation and Termination of field cables. Verification of installation of cabinets and termination of cables as per drawings. Powering up of cabinets as per power up procedures. Hardware loop checks from field equipment to marshaling and control cabinets. Installation of Communication and networking equipment and required wiring (F.O cables, Ethernet cable, F.O patch chords).

Senior mechanical Design Draftsman
PAKISTAN AIR FORCE
04/2002– 05/2011    Karachi/Pakistan

Senior mechanical Design Draftsman PAKISTAN AIR FORCE Develop detailed design drawings and specifications for mechanical equipment, dies/tools, and controls, using computer-assisted drafting (CAD) equipment. Coordinate with and consult other workers to design, layout, or detail components and to resolve design or other problems. Review and analyze specifications, sketches, drawings, ides, and related data to assess factors affecting component designs and the procedures and instructions to be followed. Computer mathematical formulas to develop and design detailed specification for components or machinery, using computer-assisted equipment position instructions and comment onto drawings. Modify and revise designs to correct operating deficiencies or to reduce production problems.

   PERSONAL PROJECT
Service category (installation and radio commissioning; maintenance; repairs; engineering and consulting; advanced services; extensions, upgrades and retrofits; end of life services, replacements, etc. upgrade of the six ships under the LEX (Life Extension) Sawari 1 tankers andFrigates of Boraida class and Sawari 2 programs for the three Al Riyadh Frigates. Royal Saudi Navy and Saudi Armed Forces all radio communication systems cabinet support designing 
EDUCATION MODERN COLLEGE OF TECHNOLOGYH
Higher Diploma of Associate Engineer (Electrical)

 CERTIFICATE
Certificate of Logout Tagout (THALES)          
Certificate area gas testing (OSHA)

Certificate Mechanical Drafting & Designing      
Certificate Information Technology (Universal
 (Technical Institute)    Institute of Information Technology)
  ACHIEVEMENTS
Hasbah and Arabiya project (110 6bay control cabinets). Work on Hasbah and Arabiya project   onshore and offshore platform
                                                                                  
Ghawar project (638 RTU cabinets testing & commissioning).
                                                                                  
RTBP, QSBP, NRBP (30 control cabinets). 
                                                                             
Manifa project (18 control cabinets). 
Fabrication and testing of control panels based on the wiring schematics approved by Saudi Aramco as per their standards.
 Sawari 1 tankers andFrigates installation and radio commissioning; maintenance; repairs
Mechanical operation design and electrical installation, testing & commissioning, maintenance analyzing and troubleshooting for controlling panel electrical, instrumentation and control system. Cabling for all commissioning RJ45 cable ,coaxial cable, radio cable 4P,10P,28P,36,cabling routing Preparation and termination cable routing wiring schematics approved by Saudi Naval or Army Force as per their standards.