1)Manage the Generator team,
·         Monitor and supervise daily operations of the plant including Electro Mechanical, Liaison & Administration
·         Oversee regular maintenance of the plant, during emergency break downs and annual maintenance of the plant along with planning, procuring spares & inventory control
·         Plan for implementation of quality systems to ensure adherence to the quality standards, smoke & dust free environment.
·         Prepare & inspect the checklist of Maintenance of various equipment. Carry out Preventive and Breakdown maintenance including installation, testing and commissioning activities viz. Building Electrification, Diesel Generator (CUMMIN)Reciprocating Electrical chiller 800 ton (York), Motor, Power Factor Controller, UPS Rectifiers(Chloride) Batteries and Earthing .
·         Continually upgrade the skills of self & team with latest technology development and maintain uptime of machineries & equipment to ensure the daily production target

Key Result Areas:
·        Responsible for planning, directing, and guiding all maintenance processes for 500 KVA Generator, Elkima 4*1600 KVA dry type distribution transformer.
·         Maintenance & troubleshooting of 11 KV Schneider XVX Vacuum circuit breaker, SACE Emax*2 ABB 400v switchgear. Microprocessor Schneider protection relay Micom P115.
·        Oversee regular maintenance of the plant, during emergency break downs and annual maintenance of the plant along with planning, procuring spares & inventory control
·        Continually upgrade the skills of self & team with latest technology development and maintain uptime of machineries & equipment to ensure the daily production target.
·        Check that agreed work by staff or contractors has been completed satisfactorily and follows up on any deficiencies.
·        Active member of Plant Safety Committee and lead roll on Plant Emergency Response team.
·        Respond appropriately to emergencies or urgent issues as they arise and deal with the consequences.
·        Organized, supervised and planned preventative/reactive maintenance of equipment.

Key Result Areas:
·        Responsible for planning, directing and guiding all maintenance processes for Generator Mahindra 320 KVA, Caterpillar
  650KVA, Perkin 650KVA.
·        Maintenance and troubleshooting of Power transformer 0.4KV/22KV, Distribution Transformer 22KV/0.4KV.
·        11KV Switchgear ABB Vacuum type, UPS supply, L.V Motors Maintenance and overhauling Up to 150 kW.
·        L.V switchgear maintenance C-Power L&T CN CS -1600 C type 400 volt circuit breaker repair and replacement.
·        Managed all operational aspects of employment for electrical team as well as acting as the on-site leader of contracted staff.
·        Responsible for implementation of all health and life-safety programs.
·        Continually upgrade the skills of self & team with latest technology development and maintain uptime of machineries & equipment to ensure the daily production target.
·        Coordinates with the HSE team to ensure health and safety measures are always implemented.
 

Key Result Areas:
·        Carried out Preventive and Breakdown maintenance including installation, testing and commissioning activities viz. Building Electrification, Diesel Generator, Motor, Power Factor Controller, UPS Rectifiers (Chloride) Batteries and Earthing System.
·        Monitor and supervise daily operations of the plant including Electro Mechanical, Transmission Line, and Liaison & Administration.
·        Manage and provide technical support to the supervisors to execute the works effectively
·        Arrange for site inspection from time to time to monitor standard of work and completion schedule..
·        Execute Electrical equipment audits and record-taking policies.
·        Able to provide technical direction to an inspection team across all disciplines of trades.
·        Prepare snags report for the new installation / fit out works inside the premises.
·        Maintenance, testing and troubleshooting of 11 KV circuit breaker, Siemens, Ariva, Schneider.
·        Maintenance & troubleshooting of oil filled and dry type 1000 KVA distribution transformer..
·        Prepare & inspect the checklist of Maintenance of various equipment.
·        Prepare estimation for supply, installation, maintenance, testing and commissioning of M.V., L.V. Switchgear, 11/0.4 KV
·        Ensure analyses on downtime trends & fix permanent actions on repeated failures

• Managed the maintenance, repair and construction of the electric distribution substations to assure the provision of continuous and reliable electrical utility service
• Troubleshot Spinning Machines, thereby enhancing its performance; steered corrective as well as preventive maintenance of Plant Aluminum Fluoride, Anhydrous Hydrofluoric Acid and Sulphuric Acid (98.5%) Equipment; UPS’s & DC Battery Chargers (Chloride) up to 55 KVA; Capacitor Bank 675 KVAR; Oil Type Hermetically Sealed 11/.400 KV Transformers up to 3150 KVA; 400 volt & 11 KV Motors up to 460 KW; PLC Based MCC, VFD's Siemens Micro Master 440 & Soft Starters; Sinamics S120; Relays 11 KV REF 545(ABB), SIPROTEC 7SJ62 Siemens, 33 KV Sepam Relay Earthing, Lighting and Cathodic Protection System
• Routinely planned, coordinated, supervised, and evaluated the work of the substation technicians. Served as a backup to the Electric Distribution Superintendent with regards to the more technical aspects of the department dealing with power quality, system loading, power factor, Supervisory Control and Data Acquisitions (SCADA), and general system operation functions
• Dealt with Technicians; trained them by sharing knowledge on Electrical Component involved in machine
• Looked after overhauling work of equipment, modifications and major repairs in order to improve overall equipment efficiency by fault-finding techniques

• Planned as well as effectuated preventive & predictive maintenance procedures and other cost reduction approaches while meeting all safety and environmental regulations and standards
• Ensured work is completed in accordance with appropriate company policies, and standards are met through monitoring of work. Provided employee feedback, understand and resolved quality issues
• Responded to regular and off-hour emergency outages, taking necessary steps to safe guard customers and employees during restoration of our electrical system in a timely manner along with troubleshooting and maintenance of 12 different substations
• Oversaw maintenance and repair works; adequate supplies of stores & spare parts, required for maintenance/repair work; initiated necessary materials requisition for replenishments of the stock
• Actively involved in Vacuum & SF6 Gas Insulated Switchgear (GIS) and P.M. / C.M., Installation, Testing and Commissioning of Circuit Breaker, Isolator, Earthing Switch and V.T.
• Responsible for checking the closing & opening timing test of circuit breaker; carried out contact & insulation resistance and stability test
• Monitored maintenance, troubleshooting and testing activities
• Managed simulation testing of Protection Device of Transformer
• Oversaw corrective & preventive maintenance of 132/33 KV other Substation Equipment; Auxiliary Transformer 500 KVA: 33KV/0.220 KV; 132 KVShunt Reactor & Capacitor Bank; Oil Treatment Machine; Batteries& Battery Charger Chloride, Thyrotronic, AEES, Excide; On Load TaC Changer (OLTC)
• Facilitated continuous improvement in the workplace by managing performance through observation and evaluation of employee work practices. Set performance levels and communicated performance metrics)

• Executed cost saving techniques/ measures and modifications to achieve substantial reduction in O&M expenditures and work within the budget; also implemented preventive & predictive maintenance procedures
• Led & motivated workforce; imparted continuous on-job training for accomplishing greater operational effectiveness/ efficiency
• Handled wide gamut of tasks involved in operations & maintenance as well as installation & commissioning of:
o SF6 Gas Insulated Switchgear (GIS) H.V. & M.V.
o Circuit Breaker, Isolator, Earthing Switch & V.T.
o 500KV ABB, 6.6 KV Galileo Migraine and Density Monitor (ABB)
o Low Voltage Metal Clad Switchgear
o Molded Case Circuit Breakers and Contractors
o Power Transformer: Transformer Rated up to380MVA Step up, 21.5/500KV, Step Down 21.5/6.6 KV
o Motors: H.V. Motors Up to 5000 KW, LV Motors Up to 150 kW
o Actuators: Motorized Valvemade of Limitorque, Rotork & Biffie
o UPS, Batteries & Battery Charger - 2160AH & Type SDH55 FIAMM)
o Protective Relays: Inspection and calibration of Electronic Relays, under voltage, Thermal and Over Current Generator
o Carbon Brushes, Brush Gear Assembly and Shaft Voltage
o Static Excitation System: Rising Station (Submersible Pump)
• Crane: Cathodic Protection System

Took care of maintenance of Power Transformer, 132 KV Oil Circuit Breaker, 4.4 KV Megna Ballast C.B., AK 225 G.E., Lighting Work, Nema Size Magnetic Contractor Maintenance, Motors, Generator, Excitation System and Crane

Executed repairing & maintenance work of 11 KV Isolating Switch
Pumps, Fire Fighting System Main & Jockey Pumps and Relevant MS & UPCV Piping Installation