QA/QC Analyst:
• Check the moisture of Salt
• Perform Viscosity Test of Sample
• Perform Titration to calculate the Chemical Oxygen Demand
• Perform Dissolved Oxygen Test
• Perform calibration of PH meter
• Perform the Total dissolved solute test of RO plant and Dying Tank and Floor Tank
• Perform Slit Density Index Test of Water
• perform the Power of Hydrogen Test of Acid
• Dying in Fibric and Thread
• Perform ISO 105 washing test and Rubbing test

QUALITY CONTROL OFFICER

Width of Fabric By standard (ASTM 3774),GSM of Fabric (ASTM 776) and (AATCC 20A)
Construction of greige Fabrics, Dimensional stability, Power of Hydrogen( by drop test and by extraction )
Fiber Identification by Computerize Electron Microscope
Tear Strength by standard (ASTM 1424),Bowing / skewing Torquing
Tensile Strength by standard ( ISO 13934),Absorbency by stop watch at least 60 plus
Formaldehyde (ISO/AATCC),Degree of Desizing by Iodine solution
Pilling Test,Crocking Fastness,Washing fastness (ISO 105 and AATCC 612A)
Chlorine and non-Chlorine Test, Light Fastness,PH of Water ,Saliva test
Rubbing wet and Rubbing Dry by standard ( ISO 105 X12)
General appearance after machine wash,Perspiration Fastness by standard ISO105
Perspiration of Acidic and Basic ( at 12.5 kpa and temperature 37C)
Button Pull strength testing by WWTM01, WWOTM01
Inspection of safety drop,HEM,SAM, Check safetydrop, HEM ,label , SAM
Calculation of OEE,s performance and Quality,Examine the production piece ,metal detector calibration
Lookafter all Quality Control parameters, Adjustment Layout of Fabric

IN PROCESSING LAB

Assessment of Gergie construction and Rawmaterial,Analysis of BMB of Causatic soda
Analysis of all Quality Control parameters,Inspect of Chemical,water,Utility,Steam,Gas Costing,
Preparation of chemical Dozing parameter,Capillary , Absorbency, Power of Hydrogen,Degree of Desizing
Whiteness by Spectrophotometer,Chlorine ,Washing Fastness

QA/QC Analyst:
• Dry charge test of automotive batteries.
• Perform Titration
• Perform Specific Gravity Test
• perform the Power of Hydrogen Test of Acid
• Capacity test C5, C10 & C20 of lime batteries.
• Check and insure the drop test of cured Positive plates.
• Check the moisture of pasted positive plate.
• Check I.G.O dry oven insure Negative plate PbO%, and also covering the rack.
• Formation tank Sp. Gravity for circuits and Temperature before and after loading plate.
• Check PH of positive plate after washing.