Designation: Project Engineer
Working Countries: Pakistan & Qatar
Company Name: DESCON Engineering Limited Pakistan , Qatar
MAJOR PROJECTS / SHUTDOWN or TURNAROUNDS
Turnaround 2022: Client Qatar Gas (Liquefied Gas Company Limited) Ras Laffan Industrial City (RLIC), Qatar
During Turnaround Worked at Ventures Qatar Gas 3&4, North Field, Train No. 6, Unit No. 3 and BL
Turnaround 2021-2022: Client Qatar Energy or Qatar Petroleum, Mesaieed, Doha Qatar
During Turnaround worked at Crude Refinery Unit No.15,16,17
Project: Phosphoric Acid Tank Facility for NP Plant, Client:  Fatima Fertilizer Company Limited Sadiqabad
Project: Installation of Low Three Pressure Booster Compressors (LPBC), Client:  Fatima Fertilizer Limited (Mari Gas Area) well #6, Daharki Sindh
Project: Installation of Knock out Drum (KOD) and Associated Piping. Client:  Fatima Fertilizer Limited (Mari Gas Area) w ell #6, Daharki Sindh
Project: Erection of Three Steel Structural Sheds for Low Pressure Booster Compressors (LPBC), Client:  Fatima Fertilizer Limited (Mari Gas Area) well #6, Daharki Sindh, Weight: 100 Ton
Project: Installation of HVAC units and associated ducting, Client:  Fatima Fertilizer Company Limited Sadiqabad
Shutdown or ATA: Annual Turnaround 2019, Client:  Fatima Fertilizer Company Limited Sadiqabad, Punjab
Shutdown or ATA: Annual Turnaround 2019, Client: kunnar Pasakhi Deep (KPD) Gas Processing Plant, OGDCL, District Hyderabad                                                                              
MAJOR RESPONSIBILITIES as project Engineer

Provide leadership, direction and supervision for every phase of the mechanical project, ensuring on-schedule completion within budget.
Responsible for overall coordination and management of any assigned mechanical projects or job
Assists Project Manager in the preparation of requests for proposals, prepares and reviews contract documents, develops scopes of projects, invoices, Division of responsibilities, additional work and delay list.
Make daily, weekly and monthly Progress report
update/ monitoring of Level IV Plan on primavera P6
Generate Purchase Requests of consumables, materials, Tools and Services by using SAP
Invoicing, Budget monitoring and costing of Projects
Coordinate with management & staff regarding mechanical work schedule, work sequence, arrangements, resources and method of work.
Coordination with other department Electrical & Instruments, Civil and Machinery
Responsible for all mechanical activities including Structure, Piping and process Equipment Installation.
Successfully installed Compressors, Heat Exchangers, Air coolers, Pumps, Agitator, Scrubbers, Drum
Visit clients’ premises to provide service, maintenance, and repair to their various mechanical systems
Fabrication and erection of Piping, structure and Equipment’s according to their design or Drawings. 
Preparation Bill of Material, MTO & B.O.Qs
Arrange all resources manpower and material for the job
Prepare daily progress report (DPR) and Day/night shift plan.
Pushing Supervisor and Manpower for timely completion of assigned works.
Ensuring the works is carried out as per the project specifications and contracts.
Pre Shut down Activities and Preparation for Shut downs and projects.
Review and comments on vendor or Client drawings and documents.
Review P&ID, PFD, Line Lists, Data sheets and Mechanical and Civil drawings.

Major Project / Shutdown
1) Project: Condensate Polish plant for Boiler Unit 3&4, Client:  Hub Power Company Limited (HUBCO), Hub Baluchistan
Installation, start up and Commissioning of condensate polishing plant. Installation of piping and process equipment’s (Ion Exchangers, Acid Tank, NAOH Tank, Raw condensate pumps and dosing pumps). Erection & Fabrication of Piping after hydro testing and air blowing. Completed punch lists before and after commissioning.
2) Outage or shut down for Boiler Unit 4, Client:  Hub Power Company Limited (HUBCO),  Baluchistan
During outage handled Following Major jobs on Boiler unit 4: A) Exhaust Duct Cleaning of unit 4. B) Pre-Heater Piping modification & installation. C) Installation and replacement of Valves in various Pipe lines D) Installation of Pump (P-1054) and associated Piping E) Cleaning and box-up of Condensate drain tanks (D-1024/1025).

Worked as Area Engineer Mechanical with Pak Arab Engineering Private Limited Daharki Sindh
1)  Project: Low Pressure Booster Compressor PHASE - III  
Client:  Fuji Fertilizer Company Limited (Mari gas Area) Well #6, Daharki Sindh
Installation, start up and Commissioning of Three Low Pressure Booster Compressors. Installation of associated piping, structure and equipment’s (Compressors, Engines, Air cooler, Scrubbers, Suction and Discharge bottles, main Skids, fuel gas skid, air filters and Silencers). Hydro testing and air blowing of pipe lines. Completed their punch lists before and after commissioning. 
RESPONSIBILITIES

Successfully install or service mechanical system (Compressor, Exchanger, Drum and Pumps etc.) on site.
Visit clients’ premises to provide service, maintenance, and repair to their various mechanical systems and Projects.
Maintain a high level of quality to meet clients’ needs.
Preparation Bill of Material, MTO & B.O.Qs
Installation of piping and structure o Erection, Supervision and Inspection of the projects.

Qualification: DAE Mechanical / B.Tech Mechanical
Designation: Mechanical Technician / Assistant Engineer
worked in Technical Services Department / Project Engineering at Fatima Fertilizer Company Limited Mukhtar Garh Sadiqabad. Fatima Fertilizer is the largest Fertilizer Complex of Pakistan. It has capable Produce Ammonia, Urea Nitric Acid, CAN, NP and AN MAJOR RESPONSIBILITIES (DESIGNING, DRAFTING, EXECUTION, SUPERVISION)

Preparation of Piping plan, Piping Sections, Equipment layout as per P&ID, Pipe Routing based on latest P&ID to meet the project requirement.
To identify location for equipment’s and associated infrastructure for routing the piping
Preparation Piping Isometric Drawing as per Piping Layout for interconnecting Equipment’s like Pumps, Heat Exchangers, Compressors, Boiler and various process equipment.
Designing and Drafting of Steel Structure, Platforms & Sheds with complete Engineering Detail.
Make and Update P&ID (Piping & Instrument Diagram)
Preparation Bill of Material, MTO & B.O. Qs on AutoCAD and MS Excel.
According to Process package and P&ID's, preparation of Detail Engineering (Tie-ins , piping plans, piping Elevation/Section, Equipment’s layout, piping isometrics, special pipe supports, BOM & MTO, Rigging Study). Many jobs/Projects handle in FFL at Ammonia, Urea, Nitric Acid, CAN, NP and AN Plant. Each piping job/Projects prepared with applicable codes and standards (ASME, ASTM, API etc.) and with project piping specification K-PLANT, CFI, MW Kellogg, CF Braun and UDHE.

MAJOR PROJECTS and ATA or Shutdowns
1) DBN Project (Ammonia Plant Revamp) including Cooling Tower, Waste Gas boiler, Cold box, E-240
2) Attended Annual Turnaround 2011/2012/2013 at Fatima Fertilizer and supervised many jobs