Monitors the construction work and work site to ensure compliance with applicable plans, specifications, standards, codes, regulations and requirements. monitors the construction work and construction site for compliance with safety Standards. Provide technical, full-time, on-site inspection of the progress and quality of the construction work performed. Reviews and provides input into field related submittals as required. Monitors resolution of quality related issues. Monitors the Contractor’s receipt inspection of materials arriving on-site To coordinate with construction crew for on‐going civil/structural activities, including but not limited to excavation, backfilling, compaction, rebar inspection, formwork inspection, Field Density Test, concrete pouring, asphalting, etc. review the relevant documents prior to start of construction e.g. IFC, project specification etc. Inspection of structural steel fabrication, erection till final inspection. Initiate the RFI’s for Consultant witness of inspection points as per ITPs. Proactive to construction crew for advising to correct the activities this could lead to non‐conformance. Be vigilant for upcoming scheduled activities in advance to coordinate with 3rd parties in advance for the activities require testing e.g. FDT, Concreting, and Asphalting etc. To coordinate with surveyor to finalize the bench mark survey setting out prior to start of construction Complies with the highest level of safety during all stages of work to avoid any type of incidents and or accidents. Take reasonable care of own health and safety and that of others in the workplace. Complies with all statutory requirements connected with the implementation of project.

inspection site all material sub grade sub base asphalt base course and wearing course preparation and set all requirements on Manpower, materials, tools and equipments needed on operation for Earth moving, lay-out, setting of reinforcement bars, Site Inspections and Supervision of all construction activities at site according to required specifications and approved construction drawings as per AASHTO,ASTM and ACI site construction requirements. Coordinate with the site technical staff and engineers to plan the site requirement for materials, equipment and manpower according to the work plan and follow up the provisions of the same with the project management Observe and apply all safety procedures for achieve the good progress for the project.

Inspections of site on daily bases to supervise the day work carried out by contractor and provide full technical support on the site as well as earth works Asphaltic work piling works, post tension suspended slabs, Pre stress Girders, Drainage works, accordance with approved drawings and required standard specifications ASTM, AASHTO ACI and B.S codes. Leading the team as an Engineer with group of supervisory staff and helping in completely execution of infrastructures Projects. Coordinate with the site technical staff/engineers to meet the site requirement for materials, equipment and manpower according to the plan and follow up the provisions. Maintain full site records, including daily site diaries in an approved format, and formal monthly progress photography. Observe site safety procedures and Keeping Safety Engineer informed of risky activities and non-compliance in the field. Accept approved requests for inspection from the Resident Engineer and attend the site to witness tests to ensure compliance to make sure that work is carried out to the client's schedule and specifications. Checking contractor's materials on site and proper storage and handling on site. Reviewing and monitoring additional works and variations to the contract recording the utilization of plan and materials

Client: Works and Services of Pakistan
Project: flood Emergency Reconstruction Projects
Responsibilities: Daily site Inspections of all kind of construction activities as well as Bridge piling, Pile load testing, earth works, asphaltic work and concrete pouring checking of bar bending schedule and formwork before pouring of concrete at site carried out by contractor according to drawings and required specifications ACI, AASHTO, ASTM and British codes. Observe site safety procedures in the field and check the conformity of executed site
Inspect all phases of construction of public works and private development projects. Monitor manpower reports and payroll for compliance with State and Federal regulations. Inspect various structures such pipe culverts,box culverts and slab culverts and also checked material sub grade, base coarse and asphaltic work as per specifications and approval drawings utilities, streets, sidewalks, gutters, and other off-site construction; check line, grade, size, elevation and location of structures for conformity with specifications and regulations. Record amounts of materials used and work performed; prepare necessary reports for progress payments. Indicate location of various appurtenances on plans. Inspect adjacent properties for damage from construction activity. Investigate resident complaints;

Client: National Highway Authority
project: construction of National Highway larkana to Qamber shahdadkot 48 km
Responsibilities: Inspected a complete phase of construction, such as substructure concrete placement, substructure forming, and steel placement, retaining walls, subgrade ,aggregate base course . concrete sphalt basecourse and wearing course and bituminous roadways.and all culverts type box culvert,pipe culvert and slab culvert Performed instrument work, such as computing and staking substructure lines and grades, foundation piles, structure excavation limits, curbs and gutters, sewers and under drains, culverts, box culverts and major drainage structures, excavation and embankment grades, cross sections and slopes, rights-of-way for road or bridge layouts, vertical and horizontal alignments for roadways, and vertical controls for drainage. Performed gradation testing, materials weighing, and inspection on such construction items as: tree and stump removal, culverts, sewers and drainage structures, shaping and depth of aggregate base or surface course, placement of guardrail, sodding and seeding, erosion control, and pavement patching.

Client: National Highway Authority Govt of pakistan
Project: lakhi to Larkana Highway 60 kilometers
Responsibilities: inspect the works executed onsite and ensure their compliance with the contract drawing and documents. inspection of embankment, subgrade,basecourse and sphalt paving Asphalt basecourse and asphalt wearingcourse steel/reinforcement work as per approved shop drawing. inspection activities for civil construction such as pre-cast erection structure, concreting works, and general filling activities and materials acceptance and ensure all are in accordance as per contract specification. review plans, specifications and programs in order to cope with the project requirements inspection of curbstone, side walk medians and culvert box culvert, pipe culvert and slab culvert. Site Supervision and monitoring of site activities Water Highway , Bridges Structural water course crossings Drainage, Box Culverts and all kind of construction work, Preparation of drawings as per site requirement, dealing with consultants. Plan Manpower and equipment as per site requirements in the direction of Site Engineer. Ability to complete work according to deadlines.

Client: National Highway Authority Govt of Pakistan
Project:Khanozae to Muslim Bagh Road Project 50kilometers
Responsibilities: Inspect site all material sub grade sub base asphalt base course and wearing course preparation and set all requirements on Manpower, materials, tools and equipments needed on operation for Earth moving, lay-out, setting of reinforcement bars, Site Inspections and Supervision of all construction activities at site according to required specifications and approved construction drawings as per site construction requirements. Coordinate with the site technical staff and engineers to plan the site requirement for materials, equipment and manpower according to the work plan and follow up the provisions of the same with the project management Observe and apply all safety procedures for achieve the good progress for the project.
placing of form works, inspection based on approved plans and specification, concrete pouring and curing. Inspect all Finishing Works like masonry, Check all necessary documents like Request for Inspection, Billings & Quotation. Preparation of work schedule and progress report accordingly in bar chart.

Client: Wapda
Project: Mangla Dam Raising
Construction of Mirpur Bypass Included Mirpur Housing Society
Responsibilities: I responsible for Traversing & Bench Mark Controlled as per profile level and layout culverts and bridges, sub grade, sub base, base and asphaltic base and wearing course. Check and confirm coordinate and Bench mark. • Controlled level from earth work to asphaltic •Controlled quantity and thickness of layers as per profile controlled as per profile.