Perform the site evaluation and identifies the following as per US LEED compliance during the Costruction phase: • The slope of the project site and where water will drain • The total area and duration of ground disturbance to identify air quality and rainwater runoff effects on neighboring properties • The location of existing rainwater management systems that must be protected • Planned construction sequencing that may require additional ESC measures over time • Weather and soil conditions that could cause rainwater runoff or generate dust • Construction entrances and their erosion and sedimentation effects on local roads servicing the project site • Monitor control measures periodically through site inspections and record maintenance activities taken during construction. • Inspections must be recorded regularly via date-stamped photographs, inspection reports, or other recording processes. • Ensure Waste Management Plan will be posted onsite. • Ensure subcontractor will be made aware of the intent of this project with respect to reduction of waste and recycling. Onsite recycling containers and/or areas will be plainly marked. • Ensure subcontractor will be expected to make sure all their crews comply with the Waste Management Plan. • Ensure the recycling containers/areas will be clearly marked. • Ensuring Lists of acceptable/unacceptable materials will be pos1ted at the site. • Ensure subcontractors will be informed in writing of the importance of non-contamination with other materials or trash.

 Directly reported to EHS Coordinator/Manager.
 Responsible for the deployment of site HSE officers as per the site activities &
requirements.
 Be responsible and accountable for the proper supervision & performance of field
Environmental & Safety Officers under his authority.
 environment Management System
 Assist manager in routine/ non-routine activities, development and implementation of
environment management system and procedures.
 Environmental Management Plan (EMP):
Prepared environmental management plan related to identified environmental aspects
and associated impacts.
 Waste Management Plan (WMP):
Prepared waste management plan and assured its implementation on site.
 Assurance of Compliance:
Fulfilled the compliance with the requirements of the Saudi ARAMCO, GAMEP and
CEMP regulations.
 Environmental Monitoring:
Ambient air monitoring including Sox, NOx, CO, PM10 and PM 2.5.
 Vehicular exhaust emissions.
 Noise monitoring.
 Potable and non-potable water testing.
 Environmental Aspects and Impacts:
 Identification of environmental aspects and associated impacts with mitigation plan.
 COSHH (Control of Substances Hazardous to Health):
 Conduct COSHH assessment and rectification of non-conformances.
 Environmental Incident/ Accident Investigations:
 Carrying out environmental incident/accident detailed investigations, propose counter
measures (CMs) & follow-ups for implementation to prevent its recurrence.

 Follow up the compliances of sub-contractor as per IFC requirement.
 Ensure the ESG requirement such as ISO standard, approach the management, zero
tolerance on child labor, without safety protocols and JSA etc.
 Ensure the lender IFC HSE WIND POWER compliances.
 Development of Waste Management System:
 Designed Hazardous and Non-Hazardous waste management system for all PEPA
processes with the consideration of environmental aspects.
 Prepared system based on 3Rs hierarchy: Reduce, Reuse and Recycle.
 Developed process followed by waste segregation and sorting based on category/ kind
of waste generation on site and disposal off-site into color coded dumpsters and
respective purpose build containers or bags.
 Disposal of recyclable, non-recyclable, and hazardous waste through licensed or
approved waste management contractor

Prepare and enforce policies to establish a culture of health and safety on site Pakistan petroleum limited gas well site X2 and X3 construction area adhi gas well Rawalpindi.
 Evaluate practices, procedures and facilities to assess risk and adherence to the law.
 Conduct the TBT onsite daily with respect to HIRA doc.
 Conduct the Monthly bases fire drill/ mock drill and medical emergency drills.
 Conducting risk assessment; safe observation reporting, Accident/Incident investigations etc.
 Delivering safety trainings & refresher courses to ABA employees, Dependent & Independent Contractors etc.
 Reviewing and implementation of specific ABA EHS Plan and Procedures and enhancement of its effectiveness by adopting the best construction practices.
 To assist EHS Manger for development of HSE reviews, Project & Plan.
 Development & procurement of ABA HSE department material like Firefighting room inventory, safety signage, boards etc.
 Develop & implement ABA HSE Compliance, audit & Incident modules with collaboration of Regional/Sector HSE Manager

 Prepare and enforce policies to establish a culture of health and safety on site construction
 Evaluate practices, procedures and facilities to assess risk and adherence to the law.
 Conduct training and safety induction presentations for health and safety matters on site construction Pakistan cables Nooriabad
 Monitor compliance to policies and laws for inspecting consultant and contractors
 Inspect equipment and machinery to observe possible unsafe conditions, unsafe Act
 Investigate accidents or incidents to discover causes and handle worker’s compensation claims
 Recommend solutions to issues, improvement opportunities or new prevention measures
 Report on health and safety awareness, issues and monthly statistics to HSE Manager PCL.
 Ensure the PCL Compliance on Site Audit and inspection of consultant and contractors

UEP PROJECT NAIMAT GAS PLANT TANDO ADAM
 Conducting risk assessment; safe observation reporting, Accident/Incident investigations etc.
 Delivering safety trainings & refresher courses to Clients employees, Dependent & Independent Contractors etc.
 Coordinating fire/evacuation drills & first aider training refreshers, Waste data reporting on monthly basis, Monthly & bi-weekly inspection of fire extinguishers.
 Fire alarm & Emergency lights. Strengthen the PTW (Permit to Work) system and implementation of new permits (i.e. Work at Height, Electrical, Confined Space and Excavation work permit), Line walk & near miss reporting trends & its corrective & preventive measures align with Engineering.
 Reviewing and implementation of specific EHS Plan and Procedures and enhancement of its effectiveness by adopting the best industrial practices.
 To assist EHS Manger for development of HSE reviews, Project & Plan.
 Calibrations of all HSE & like Lab equipments, noise level meter & Load lifting equipments, electrical equipments.
 Developing of SOPs/SWP for in coordination with Area in-charge and EHS Manager
 Conducting safety line walks for identification of any potential hazards & its rectification.
 Manage an effective and continuous environmental system that ensures compliance to local and Clients standards.
 Conducting Task hazard Analysis to identify opportunities for risk reductions, and develop action plan.
 Management of HSE department documents in accordance to Clients documents control standard.
 Development & procurement of HSE department material like Firefighting room inventory, safety signage, boards etc.
 Develop & implement EHS Compliance, audit & Incident modules with collaboration of Regional/Sector EHS Manager

safety assistant officer
 Safety measurement regarding to confined space.
 Gas testing of confined space.
 LEL values of hydro carbon.
 Conducted the TBT regarding their CS work.
 Bundle removing, worker time in/out in SC.
 Maintaining the log sheet /log board, SCBA/BA/ECBA training
 H2S training conducted by ADCO.
 Installation of bundle during their cleaning of heat exchanger, TBT regarding the height, TBT regarding the power brushing of CS, work in pits safety
 Training delivered to employee of fire extinguisher use and types of fire and triangle
 Requirement of entry tags of confined space and studied the confined space permit their attachment of HIRA
 Emergency plan of confined space isolation certification coordination with the PTW and discussion with client’s observation and work process
 PICWS person regarding the requirement of the clients like GASCO al Ruwwais industrial city of Abu Dhabi, also work as JP coordinator in ADCO plant in al dhabia

administration work solid waste Management
 Water supply and control and development of water resources, other than systems maintained by the Union and Village Councils,
 Sanitation and solid waste collection and sanitary disposal of solid, liquid, industrial and hospital wastes, Roads and streets, other than roads falling under the jurisdiction of, and maintained by, the district government, or provincial government and streets maintained by the Union Administration or Village Council.
 Traffic planning engineering and management including traffic signaling systems, signs on roads, street markings, parking places transport stations, stops, stands and terminals, Street lighting, Firefighting, Parks, playgrounds, open spaces, Slaughter houses.

work as environmental engineer